Company Address
No. 6668, Section 2, Qingquan Road, Qingbaijiang Dist., Chengdu, Sichuan, China
● Product Parameters
| Model | CUT-100AIR | CUT-130AIR | CUT-160AIR | |
| Plas ma | Rated Input Voltage | 3P AC 380V 50HZ | ||
| Rated Input Power(KVA) | 13.5 | 17.8 | 23.8 | |
| Real Output Current(A) | 85 | 105 | 130 | |
| Rated Output Voltage(V) | 114 | 122 | 132 | |
| Duty Cycle (%) | 60 | 60 | 60 | |
| No-Load Voltage(V) | 330 | 340 | 340 | |
| Adjustable Current Range(A) | 25-100 | 25-130 | 25-160 | |
| MMA | Rated Input Power(KVA) | 8.8 | 10.4 | 16.5 |
| AdJustable Current Range(A) | 30-220 | 30-250 | 30-350 | |
| No-Load Voltage(V) | 66 | 66 | 66 | |
| Quality Manual Cutting Thickness (MM) | 25/carbon steel | 30/carbon steel | 35/carbon steel | |
| Max Manual Cutting Thickness (MM) | 30/carbon steel | 35/carbon steel | 40/carbon steel | |
| Plasma Gas Pressure Range | 0.3-0.6Mpa | 0.3-0.6Mpa | 0.3-0.6Mpa | |
| Cooling Mode | Air | Air | Air | |
| Arc lgnition Mode | HF, untouch | |||
| Protection Class | IP21S | |||
| Insulation Class | F | |||
| Machine Dimension (MM) | 600*360*550 | 600* 360*550 | 640*385*630 | |
| Net Weight(KG) | 39 | 39.5 | 54.8 | |
● Precautions before use and when cutting
1. The advantages of the plasma cutting machine are that the plasma arc energy is more concentrated, the temperature is more localized, the cutting speed is faster, the deformation is smaller, and it can cut stainless steel, aluminum and other materials. .Plasma cutting machine has the advantage of cutting thick plates, because the cutting speed is much higher than laser and flame
2. The plasma arc can cut various metals, such as stainless steel, heat-resistant steel, titanium, molybdenum, tungsten, cast iron, copper, aluminum and aluminum alloy. , Cutting stainless steel. Aluminum thickness up to 200mm or more.
3. The plasma arc cutting speed is faster, and the production is relatively partial.
4. When cutting the plasma arc, you can get a relatively narrow radian, clean, tidy, no sticky residue, close to vertical incision, small incision deformation and thermal influence, small change in hardness, and good cutting quality.
No. 6668, Section 2, Qingquan Road, Qingbaijiang Dist., Chengdu, Sichuan, China
+86 13587752681