Digital Control Heavy Industry Movable Stud Welding Machine

The stud welding machine has strong power, safe and easy operation, and can also realize short-cycle drawn-arc stud welding and long-cycle drawn-arc stud welding. It can weld various components such as ordinary studs, T-shaped studs, pins, balls, etc. The welded joints are firm and safe, and there is no high requirement for the accuracy and tip quality of the studs. It is especially suitable for oily, rusty, galvanized surfaces. or other coated workpieces.

The stud welding machine is very time and cost saving, all stud welding constructions do not need drilling, punching, threading, riveting, threading and finishing steps. Welding torches continue to expand the application potential of structural design. In stud welding, the welding process is short in time, high in current and low in penetration.

Therefore, it can be welded to thinner sheets. Workpieces for stud welding must be welded from one side. Capable of welding in all positions, connected to restricted vertical bulkheads with the aid of extenders.

Due to the short welding time and small deformation after welding, no trimming is required. Because the welded construction requires no drilling, there are no leaks. The stud welded joint can achieve high strength, that is, the strength of the stud welded joint is greater than the strength of the stud itself. After electroplating or welding of high-alloy plates, there is no mark on the back. The economy is good, and the advantage of stud welding over other welding methods lies in the welding power.